Concept2 Utility System Requirements

The Concept2 Utility is both Windows and Mac-compatible. Please refer to the system requirements below.

Windows

  • Windows 7*, Vista*, XP Pro or Windows XP Home

    Notes:
  • Working USB Port to connect PM or external card reader (when using the PM with the Concept2 Utility, a USB cable is also needed)
  • Optional: Internet connection to perform internet-related tasks such as:
    • Uploading workouts to the Concept2 Online Logbook
    • Receive notifications that a new Concept2 Utility Version is available
    • Download new versions of PM3 or PM4 firmware
  • Optional: PM3 Firmware Version 90 or above; PM3 Firmware Version 101 or above required for use with the Concept2 Utility Version 6.10 (pertains to PM3 users only)

    Note: If you plan to use a PM3 with the Concept2 Utility to read your LogCard, advanced Concept2 Utility functions are not available unless the PM3 is running Firmware Version 90 or above. Basic functions such as backing up a LogCard or transferring LogCard data to a CSV file should work with earlier firmware versions. Mac users who would like to use their PM3 in conjunction with the Concept2 Utility must upgrade to Firmware Version 90 or above. For optimal usage, Concept2 recommends that all PM users upgrade to the latest firmware version available for the model PM you have.
  • Optional: External LogCard Reader:
    • OmniKey CardMan 3121 card reader
    • Athena ASE IIIe

Macintosh

  • OS X 10.3–10.7
  • Working USB Port to connect PM or external card reader (when using the PM with the Concept2 Utility, a USB cable is also needed)
  • Optional: Internet connection to perform internet-related tasks such as:
    • Uploading workouts to the Concept2 Online Logbook
    • Receive notifications that a new Concept2 Utility Version is available
    • Download new versions of PM3 or PM4 firmware
  • Firmware Version 90 or above for PM3 users (Version 97 or later recommended)

    Note: PM3s must be upgraded to Version 90 or above on a Windows PC prior to use with a Macintosh.

  • Optional: Athena ASE IIIe External LogCard Reader
  • Optional: OmniKey CardMan 3121 Card Reader

Summary of Supported Features and Versions


Operating System Versions Windows Macintosh
Tested and supported:

Windows 7
Windows Vista
XP Home
XP Pro

10.7
10.6
10.5
10.4.2
10.3

Untested, may work: 98SE
Me
2000
XP 64 bit		 Any not listed above
Not supported

95
98

10.2
OS 9

Device Compatibility
PM3 Firmware Version 89 or below Limited Functions No
PM3 Firmware Version 90 Yes *
* PM3 Firmware Version 101 required for use with Concept2 Utility 6.10		 Yes
PM4 Firmware Version 14 and above Yes Yes
CardMan 3121 Reader Yes, must use OmniKey's driver

10.7: No
10.6: Yes, download driver
10.5: Yes, download driver
10.4.2–10.4.11: Yes
10.3.9: Yes 
Intel Macs: Yes
All Others: Untested

CardMan 3021 Reader Yes, must use OmniKey's driver

10.7: No
10.6: Yes, download driver
10.5: Yes, download driver
10.4.11: Yes
All Others: Untested

Athena ASE IIIe Card Reader Yes 10.7: Yes
10.6: Yes
10.5: Yes
10.4.2–10.4.11: Yes
10.4.1: No
10.4.0: No
10.3: Yes
Intel Macs: Yes
Update PM3 Firmware Yes Must update to Firmware Version 97 using a PC first, then can use a Mac to install future firmware updates
Update PM4 Firmware Yes Yes
Note: Concept2 has had reports from some customers that the OmniKey 4000 and OmniKey 4040 card readers work with the Windows version of the Concept2 Utility. Please note that this information is provided here for your reference and that Concept2 does not directly support these devices.