Model D Assembly

The indoor rowers require very little assembly. The Model D Indoor Rower requires the installation of the front legs using a total of eight screws. We include the necessary tool and clear instructions with lots of pictures. Allow about 20–30 minutes for the job.

Once all the installation steps are completed you will need to connect the monorail end of the indoor rower with the flywheel end. This procedure is illustrated in the assembly instructions, or you can view the procedure in the video clips below.

Please note that this procedure differs slightly depending on when your Model D Indoor Rower was manufactured. Refer to the following dates to access the appropriate video for your indoor rower.