| Products | Shop Online | Commercial Solutions | Interactive Tools | Motivation & Community | Training & Competition | Service | Company |
Model D Assembly Information
|
The Indoor Rowers require very little assembly. The Model D Indoor Rower requires the installation of the front legs using a total of 8 screws. We include the necessary tool and clear instructions with lots of pictures. Allow about 20-30 minutes for the job. Once all the installation steps are completed you will need to connect the monorail end of the rower with the flywheel end. This procedure is illustrated in the assembly instructions, or you can view the procedure in the video clips below. Please note that this procedure differs slightly depending on when your Model D Indoor Rower was manufactured. Refer to the following dates to access the appropriate video for your Indoor Rower. Model D August 2006 - Present  Framelock Connection/Disconnection - Dialup - 1MB Framelock Connection/Disconnection - Broadband - 7MB
Download the assembly instructions in PDF format:
Framelock Connection Framelock Disconnection
Download the assembly instructions in PDF format: |
Model D Indoor Rower August 2006 - Present
Model D Indoor Rower July 2003 - August 2006 |
