Concept2 Watt Challenge

The Concept2 Watt Challenge was originally designed for the TV program The Biggest Loser. Now you can set up your own challenge and test your endurance.

After you download and install the software, plug your PM3 or PM4 into your computer using a USB cable and start the program.

Keep the watt meter in the green to keep the challenge going. Be sure to stay out of the yellow zone; one stroke in the red zone and the challenge is over!

Requirements

  • Windows XP or Vista
  • PM3 or PM4 monitor running latest firmware
  • USB Connection between computer and PM3 or PM4

Installation Instructions

Saving the Setup to Your Hard Drive for Later Installation

  1. Click Download. The File Download window will appear.
  2. On the File Download window, click Save.
  3. On the Save As window, navigate to the folder in which you would like to save the setup file and click Save.
  4. When you are ready to install the setup program, locate the file on your hard drive (same location as where you saved the file in step 3).
  5. Double-click the file to begin installation. The InstallShield Wizard will launch and guide you through the setup.

To Download and Run this Setup Now

  1. Click Download. The File Download window will appear.
  2. On the File Download window, click Open. The InstallShield Wizard will launch and guide you through the setup.

Source Code

The Concept2 Watt Challenge is free, open-source software. Download source code

Concept2 Watt Challenge

Windows
.msi format
6 MB