Service | Concept2

PM4 Troubleshooting

Error Codes

Error Code Description Resolution
37-, 39-, 137- or 240- These error codes are associated with the LogCard or the PM Memory if no LogCard is used. Resolution
43 This error code indicates there is a problem with the LogCard format. Resolution
50 This error occurs when the PM cannot properly compute the drag factor. Resolution
120- through 129- These error codes occur when the monitor is being used with external or third-party software. Resolution
571 This error code applies only when the rechargeable battery pack is in use with the PM4. Resolution
573-1 This error occurs when powering up the performance monitor. Resolution
779-1 This error code is a result of damaged pins inside the RJ45 jack, usually caused by inserting a non-RJ45 plug into this port. Resolution